Secure One-Piece Mount for Your P-TAC Glass
Nikon’s P-TACTICAL scope mount is essentially their M-TACTICAL one-piece mount configured to accept the 1" tubes of their P-TACTICAL line of AR-15 / MSR scopes. Like its 30mm friendly cousin, the P-TACTICAL mount is available in standard, dead-flat (0 MOA) configuration or with built-in 20 MOA elevation that helps you land accurate long-range shots without exceeding your scope’s elevation adjustment.
Of course, the P-TACTICAL mount clamps to any AR-15 flattop receiver and provides optimum height and eye relief for your Nikon P-TACTICAL scope. It’s geared for AR-15 installations, but can easily be used with a wide variety of other optics with 1" O.D. tubes that call for an easy-to-install Picatinny mount.
- Built in 1" scope rings
- Two Allen head cap screws secure top ring halves
- Strong yet lightweight all-aluminum construction
- Durable matte black anodized finish to match your P-TACTICAL scope
- 0 MOA & 20 MOA models available
Nikon set up the P-TACTICAL scope mount with a cantilever that extends approximately 2" forward of the receiver to you can push your scope forward for plenty of eye relief - and also keep it from interfering with your access to the charging handle. Two steel cross-bolts and the full-length clamping bar secure the mount to any MIL-STD 1913 Picatinny receiver rail.
To meet the specific optic mounting needs of the SPR shooters, GG&G has introduced their FLT Scope Mount With 30mm Integral Rings.
For comparative purposes the SPR Scope Mount places the scope forward 1.5 inches more than the GG&G AC-30 Scope Mount. The FLT Mount is lightweight weighing in at only 5.5 ounces, and is 5 inches long. It is low profile allowing excellent cheek weld when mounted to the AR-15/M16 flattop upper receiver. The height from the centerline of the 30mm integral rings to the top of the dovetail mounting platform is 1.460 inches. The center to center dimension of the rings is 3.750 inches. Manufactured from 6061 T6 aluminum and Type III hard anodized matte black to mil-spec.
AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095
Versatile, Adaptable Truly Quick-Attach/Detach Scope Mount
KDG’s 34mm Sidelok Modular Optic Mount provides user-configurable options that made it one of the most versatile QD scope mounts available. Of course, you can quickly clamp it to any Picatinny receiver rail, then remove it just as fast, with one hand, simply by pressing the release button at the front. The Sidelok Optic Mount’s innovative locking system makes it virtually impossible to unintentionally release the mount. Cam lock system ensures the Sidelok will fit all Picatinny rails, even those that are out of spec.
The rings on the Sidelok Modular Optic Mount can moved forward or backward to avoid interference with objective bells, turret knobs, or magnification adjustment collars. They are CNC-machined and wire-EDM cut to be as precisely concentric as possible. Top- and bottom-halves are machined together, as a unit, and given
- Fully machined high-grade aluminum alloy
- Top & bottom halves machined together, as a unit, for best alignment
- Witness marks help the user keep the correct top mated to its matching bottom
- Type 3 hardcoat anodized, matte black
The rings on the KDG Sidelok Modular Optic Mount are removable, so you can swap rings to fit a different-diameter scope tube without having to buy a whole new mount.
Big Book Catalog, Issue:71, Page:259